Description
This fantastic new Electro-Fashion kit from Kitronik has been specially designed so that electronics can easily be used in textile applications - without soldering!
The kit includes conductive thread (which is a thread that can be used like cotton thread but conducts electricity like a wire), our own custom designed Sewable Coin Cell Holder, one coin cell battery, and two ultra slim, pre-mounted, easy sew E-Textile LEDs.
The coin cell holder has the benefit of large, easy-to-stitch connection points (no more difficult little holes!) and clearly marked terminals that show the battery polarity.
The LEDs are less than 3mm tall and are also clearly marked with '+' and '-' to indicate which is the positive and which is the negative connection. The PCBs are double sided, making the conductive thread connection very reliable (see example picture below).
Features:
- Ultra Slim Sewable LEDs.
- Easily add lights to textiles projects.
- Easy-to-stitch connection points.
- Clearly marked '+' and '-' connections..
- No soldering required.
Contents:
- 1 x Coin Cell Holder.
- 2 x Electro-Fashion® LEDs (Blue, Green, Red,¬†White, Orange or Yellow).
- 1 x 2m Conductive Thread.
- 1 x CR2032 3V Coin Cell.
LED Colour Variants:
- Blue - Product Code: 2735
- Green - Product Code: 2736
- Red - Product Code: 2737
- White - Product Code: 2738
- Orange - Product Code: 2768
- Yellow - Product Code: 2769
Dimensions:
- Sewable Coin Cell Holder Length: 34mm.
- Sewable Coin Cell Holder Width: 20mm.
- Sewable Coin Cell Holder Height: 4.5mm.
- LED Length: 15mm.
- LED Width: 6.5mm.
- LED Height: 2.7mm.
- CR2032 Battery Height: 3.2mm.
- CR2032 Battery Diameter: 20mm.
Requires:
- Scissors.
- Needles.
Resources:
Example Circuit:
.
For illustration only, not actual components provided.
Caution:
- The coin cell holders in this pack contain Nickel and should not be used in designs where it will be in prolonged contact with the skin.