Description
These simple, easy-to-use deionisers are suitable for users of 5-10 litres per day of laboratory water for general use such as media preparation. Wall mounted to save bench space. Water available at up to 1 litre per minute. Deionised water quality better than 1 M/cm. No electricity required .Operate on a normal mains water supply & pressure. Deioniser cartridge indicates cartridge exhaustion via a resin colour change window turning from blue (good) to brown (bad) Both models are supplied with an inlet hose adaptor, flow control valve, deioniser cartridge, quick release cartridge fittings, choice of 2 outlet tubes (spout or flexible hose), wall mounting bracket and instructions. Requires a 12mm braided hose (not supplied) to connect the Labwater to a tap or stopcock.
Weight and Dimensions
Width (mm): 80
Depth (mm): 100
Height (mm): 760
Maximum Shipping Weight (kg)*: 4.4
Maximum Working Weight (kg)*: 3.5
Installation requirements
Feed Water: Potable
Maximum TDS (ppm): 1000
Feedwater temperature: 1-35oC
Technical specification
Max. feed pressure (bar):0.5 – 5
Max. feed flow rate (l/hr): 60
Output capacity (litres)
@ 50 mg/l tds (soft): 1280
@ 200 mg/l tds (medium-hard): 320
@ 300 mg/l tds (hard): 212
pH: Neutral
Conductivity: 10 – 1µS/cm
Weight and Dimensions
Width (mm): 80
Depth (mm): 100
Height (mm): 760
Maximum Shipping Weight (kg)*: 4.4
Maximum Working Weight (kg)*: 3.5
Installation requirements
Feed Water: Potable
Maximum TDS (ppm): 1000
Feedwater temperature: 1-35oC
Technical specification
Max. feed pressure (bar):0.5 – 5
Max. feed flow rate (l/hr): 60
Output capacity (litres)
@ 50 mg/l tds (soft): 1280
@ 200 mg/l tds (medium-hard): 320
@ 300 mg/l tds (hard): 212
pH: Neutral
Conductivity: 10 – 1µS/cm